KW moist feeds storage and handling booklet

Good storage discipline realises greater feed value

To get the most from moist feeds it is important to look after them properly, wastage will occur if stored incorrectly. Good sheeting that excludes and prevents the penetration of air is key to success. This can be achieved easily by following the guidelines below, which should take about 20 minutes per load. Potato based products are the only exception, due to their structural nature, most types of these feeds are best left unsheeted.

Trials and farm experience have shown that, with care and attention, moist feeds can be stored for with negligible losses. Please refer to your product information sheet for the storage times associated with your product.

Selecting the storage access and site

The site must be directly accessible by the delivery vehicle, or the product will need to be tipped elsewhere and then transferred using farm-based equipment. Loads will be delivered in bulk and tipped, on either a 29 tonne articulated vehicle or a 20 tonne rigid vehicle.

An articulated vehicle is 14 metres (45 feet) long, and when tipping the trailer height reaches 17 metres (55 feet) high so ensure there is adequate room for delivery and there are no overhead cables. They also require a turning circle of 25 metres (80 feet). If you do not have enough space to tip safely, deliveries in a 20 tonne rigid vehicle may be more suitable as they require less turning and tipping space. If in doubt, contact your local KW feed specialist.

To read the rest of our KW moist feeds storage and handling booklet please click here